Questions:

Ask a Question.

Get answers from people like you -- Ask anything from "How do I use a Data Collector?" to "How do I grow my business?"

Discover Answers.

Find out if your question has already been answered.

Answer a Question, Help Others.

Give advice and share your own experiences.

Recent Questions

• Batteries

  • » what does it mean when the temp light comes on on the charging cradle?

    8 months, 3 weeks ago

    Could be a problem with the charger, the battery, or the power supply. We'd have to look at it to know for sure. 512-282-4099

    » View Answer

  • » Can you use a 5600 Geodimeter T-adapter to connect a multi pack battery supply, a TSCS2 data collector and and external bettery pack to a 5000 series total station? We are basically looking to have a back supply of battery power. Extra batteries are too expensive for us so we are hoping to use a form of an external battery.

    8 months, 3 weeks ago

    The short answer is No. There are three ports on the T adapter: One is power (either a 3 pack or an alligator clip cable) One is for the data collector One goes to the instrument

    » View Answer

  • » does anyone know where to get a battery for the georadio (the one on the pole)? Mine is going, going, gone.

    8 months, 3 weeks ago

    We can order it for you. The cost is $111.30. Give us a call. 877-820-9185

    » View Answer

  • » DO YOU HAVE AN MSDS SHEET FOR THE BATTERY TO THE BATTERY WITH CARRYING CASE FOR HPB450 RADIO TRIMBLE 56657-00

    8 months, 3 weeks ago

    Yes, we have this but I can't post it to this website. Send me your email address and I'll send it to you.

    » View Answer

  • » I have two Sokkia BDC46A battery packs I need re-celled and probably need to purchase one more. Do you all re-cell them and sell them?  Thank you Gene G. Orive Jr. Mejia & Rose Inc Brownsville, Texas 956-544-3022

    8 months, 3 weeks ago

    The BDC46A can't be recelled. We do carry them, we have 1 in stock and we sell them for $89. Please let us know if you would like to purchase one. Thank you!

    » View Answer

  • » excuse me, my name is Martha and the last september 29 I bougth one battery with the next description ( 572-204-270- Battery-Nimh/Radio,3.8 Ah, 12V )the question is how many hours i need to charge the battery the first time and how many hours after.excuse my orthography but i do not speak very good the english lenguage. thanks

    8 months, 3 weeks ago

    » View Answer

  • » need price and availability on a battery pack for the spectra precision laser plane 500c.

    8 months, 3 weeks ago

    They are $101.00 and we have one in stock.

    » View Answer

  • » We would like to buy 3 or 5 Trimble 5600 External Batteries (572-204-270). Two questions: 1) Do you have them in stock? 2) Can you ship to Turkey? Thanks, Jason T. Herrmann Neubauer Expedition Islahiye, Turkey jherrma@uark.edu

    8 months, 3 weeks ago

    Yes, we have them in stock and yes we can ship to Turkey.

    » View Answer

  • » I hava a Geo Pro 600 radio that won't work any more due to me switching the polarity on the 12V battery that was connected to it.

    8 months, 3 weeks ago

    No problem! We can turn it around same day if you'd like to ship it in overnight. It's probably going to require a new radio module and possible a new housing. Please give me a call for an estimate. Clay Clifton Service Technician 512-282-4099

    » View Answer

• Cables

  • » I have an extra long cable made for a Trimmark 3 if I upgrade to a HPB450 can I still use the cable from the old system?

    8 months, 3 weeks ago

    Yes. You need an adapter/converter to go from your existing tnc connector to a bnc connector. You can find it an electronic store, i.e. radio shack.

    » View Answer

  • » what cable is needed to connect a TSC1 to a Trimble georadio

    8 months, 3 weeks ago

    It is a seven pin lemo zero shell to a 4 pin hirosi. Catalog number 44147 RevA. We have it in stock, give us a call and it’s yours.

    » View Answer

  • » What adapter or cable if any do you use to connect a TSC2, TRIMBLE 5600, AND

    8 months, 3 weeks ago

    If you are using the recommended Trimble Multi Battery Pack (Part #572204273) then all you need is a serial to 4 pin hirosi cable (Part #148-CGEOD600STRT).

    » View Answer

• Cases & Bags

  • » I need a carrying case for the Nikon 332DTM. Is this available for purchase? Thank you, Kerry spaugh

    8 months, 3 weeks ago

    Yes, we do. The cost is $440.00

    » View Answer

• Data Collector Accessories

  • » What is the pinout for the Geodimeter CU to the DB9 connector on a computer and/or the DB9 connector of the TSC2?

    8 months, 3 weeks ago

    This question would be best answered by calling our Service Department directly for a schematic drawing. Please call 512-282-4099 and ask for Dan.

    » View Answer

  • » What can be done if the wrong charger was plugged into your tsc2 data collector?

    8 months, 3 weeks ago

    Depends on what the damage is. If the unit will not power on, you can try replacing the battery to see if that was the only unit damaged. If power has affected the main board, you will need to send it in for service.

    » View Answer

• Data Collectors

  • » We have a second TSC2 that we will soon be using in the field. The software on our second unit is an older version and we would like update to at least a Version 12.46. Where can I get an update on this software?

    2 weeks ago

    You'll need to buy an extended warranty. It's $380.00. Give us a call. 512-282-4099

    » View Answer

  • » How do you connect a TSC2 to a PC?

    2 weeks, 4 days ago

    Typically there is a USB to TSC2 cable provided with the TSC2 that connects the two. Otherwise you can us a USB drive to transfer the data between the two. However, the TSC2 is designed to download upon connection when cabled to the computer. Additionally, when connected, the system will ...

    » View Answer

  • » I bought a second hand trimble robotic SPS 630 with a TSC 2 contollor with sps900 software running on a windows 5 mobile file operating system. If I buy the trimble survey contoller ver 12.49 and download in on the TSC 2 contoller, would it work with the SPS630. Where can I buy survey contoller Ver 12.49 at a fair price?

    2 weeks, 6 days ago

    Survey Controller standalone is about $2900, you may be better served by finding a used TSC2 for sale and then selling your current controller to offset the cost. We have several used TSC2's with Survey controller for about $2500. Once done, you will have to see if your local Trimble ...

    » View Answer

  • » I have a Trimble Juno SB handheld GPS receiver; I went through the OS upgrade to ROM version 1.04.09, following directions on Trimble's support site; instead of finishing clean I got a 'Caution!' triangle and Reinstall OS! instruction on the screen. Can do nothing with it. Any suggestions? Thank you.

    3 weeks ago

    The best thing to do with it is to send it to an Authorized Trimble repair center. If you let us know where you are located, we can suggest someone local.

    » View Answer

  • » How do you do a line to line intersect on the TSC3?

    1 month ago

    Go to Cogo, compute point, then select 4 point intersection from the drop down menu. The first two points will compute the first line, then the second two points will create the second line. It will create a point at that intersection.

    » View Answer

  • » Does the TSC2 2.4Ghz running either Access or Survey Controller run robotically with the SPS range of Total Stations? I want to use both Access and Survey Controller and also SCS 900. Thank you.

    1 month ago

    Trimble can create a "HOBO" code that will allow a SPS total station work with Survey Controller or Access

    » View Answer

  • » Can the TSC2 running either Trimble Access or Survey Controller run with a Leica 1200 or 1100 series robotically with external radios? Thanks this is a great service.

    1 month ago

    Yes, we have had success configuring Survey Controller to run a Leica 1100 and the Leica 1200 robotically in the past.

    » View Answer

  • » Do you sell battery packs for the TSC2 and if so how much are the?

    3 months, 2 weeks ago

    We sure do and they are $261.45. Give us a call. 512-282-4099

    » View Answer

  • » How do I connect a Trimble TSC2 to Sokkia total station?

    3 months, 3 weeks ago

    Make sure you have the correct cable, 9 pin serial to 6 pin Hirosi, part number 148-SCGTSSOKTOP. Then assuming you are running Trimble Survey Controller on you TSC2 you must create a survey style and choose the parameters necessary, baud rate, instrument type, etc....... Once that is done the two ...

    » View Answer

  • » Is there anything that you can do in the field for a TSC2 that has had the touch screen quit working?

    5 months ago

    You can try a hard reboot (holding power button for 5+ seconds), but more than likely it needs a new screen. Send it to us and we'll turn it around in one day.

    » View Answer

  • » How do I locate a deleted job file on the TSC2?

    8 months, 3 weeks ago

    Once a job file has been deleted on the TSC2, it is not recoverable. Please let us know if you have any further questions.

    » View Answer

  • » Hi Can I use a Trimble ACU controller with Trimble VRSNow? Or do I have to upgrade to a TSC2/TSC3

    8 months, 3 weeks ago

    » View Answer

  • » Will this data collector w/ it's 2.4ghz radio work with an older Trimble 5600 Robot? So that I don't have to pack around the georadio?

    8 months, 3 weeks ago

    You will need to utilize the georadio with the 5600.

    » View Answer

  • » How I can run Geodimeter 5600 semirobotic using trmble TSCe data collector

    8 months, 3 weeks ago

    2 Methods you can use: A single battery adapter, SKU: 572-204-256, with a 4 pin cable 53008007, and a geodimeter battery 572-204-270, And an instrument cable 148-CGEOD600S T adapter, 572-202-312, with a 4 pin cable 53008007, with an alligator clip cable CA-1296 And an instrument cable 148-CGEOD600S you can connect ...

    » View Answer

  • » Is a Ranger 500x the same as a TSC2? I want to run Trimble Survey Controller on my Ranger. I have external 2.4 radios?

    8 months, 3 weeks ago

    » View Answer

  • » I have the Nomad collector along with the Spectral Precision10. On the Nomad screen I have a battery power in the upper left corner that starts at 5 and goes down to 0 as power drains. What is this battery power representing? The Pole? The Instrument? Also On my 360degree degree prism Part#571 204 312 there is a 4 pin connection and on my radio there is a 4 pin connection what can this be used for? Hopefully this info is enough to at least start if not I can send pictures. thank you

    8 months, 3 weeks ago

    » View Answer

  • » how to connect Tsc2 using trimble access and bluetooth to S8 total station?

    8 months, 3 weeks ago

    You will need to turn Bluetooth on in the Instrument menu of the S8 which will be available for 10 seconds after you power the instrument on. On the data collector, go into the Trimble Access main menu, select Settings, then Bluetooth. You will select config on the bottom of ...

    » View Answer

  • » I am trying to connect my tsc2 to my 5600 using the internal radio in the tsc2.

    8 months, 3 weeks ago

    A TSC2 with an internal radio will only connect to a Trimble S6.

    » View Answer

  • » Are Carlson data collector compaatible with Nikkon total stations?

    8 months, 3 weeks ago

    This is a very general question, yes, the Carlson data collector will work with a Nikon instrument. When asking this question you should always give the model number instrument you wish to interface with because going forward it will be more and more common that instrument manufactures may choose not ...

    » View Answer

  • » what is the vertical accuracy of Trimble TSC2 data collector

    8 months, 3 weeks ago

    The TSC2 is not an instrument. It does not have a vertical circle.

    » View Answer

  • » TSC2 worked for a few hours in 20 degree weather, was manually turned off, and will not turn back on. Was fully charged last night. Any ideas how to fix it?

    8 months, 3 weeks ago

    It's unlikely that the issue is related to the cold weather. The operating temperature range on this is -22F to 140F. Try removing the power boot module(battery) off of the TSC2 using the two flat head screws on the back of the unit. With the battery removed, press the power ...

    » View Answer

  • » We are using a Trimble 5603 and TSC2. We loose communication after 450'. We have tried changing antennas. The internal module/antenna cable was replaced in 2009. What would be the cause of this? Would sending the instrument in for calibration/tuning help?

    8 months, 3 weeks ago

    If the external radio has a red light, it means that the radios are 450MHZ georadios and both the internal and external radios can be tuned. If the external georadio has a blue light, it’s a 2.4GHZ system and either the internal or internal radio module may be faulty. Either ...

    » View Answer

  • » I am trying to use a TSC2 with Trimble 5800 receiver and I get the message "receiver does not support handhelds". What do I need to do in order to get connectivity?

    8 months, 3 weeks ago

    You would probably be best served by calling us at our office, the phone number is 512-282-4099. We need to find out the type and version of software that you are running on the data collector as well as the firmware version on the 5800. There are some additional options ...

    » View Answer

  • » Is the S3 available with Survey Pro software in the TSC2

    8 months, 3 weeks ago

    » View Answer

  • » Can you help me configure the TSC2 data collector using Survey Pro software with a non robotic geodimeter total station?

    8 months, 3 weeks ago

    » View Answer

  • » I have a LM80 with version 3.1 of the software. When I shoot a measurement for layout the attached Nikon DTM-310 displays the correct distance but the LM80 reads the distance short; ex., the total station reads 44.985' but the LM80 gets it as 43.128'. My question is: will a software upgrade fix this problem and if so what would it cost? The LM80 was supposed to work with this total station but there is apparently a problem with this level of the software.

    8 months, 3 weeks ago

    Several things may be going on. The instrument and or data collector may have a prism constant dialed in that is effecting the displayed distance. Another possibility is that you are seeing slope distance on the instrument and horizontal on the data collector or vice versa. I am not aware ...

    » View Answer

  • » We have a TSC2 with SCS900 and would like to have Survey Controller installed. Is that possible? If it is, what will the cost be?

    8 months, 3 weeks ago

    Yes, Survey Controller software can be purchased separately the installed on your TSC2. All we would need is the serial number of your data collector. I have a feeling you’re now wondering about cost. The price of the software is $2,995.00

    » View Answer

  • » What is the hardware difference between Ranger and TSC2? Can Ranger have 2.4Ghz radio?

    8 months, 3 weeks ago

    Hardware wise they are pretty much the same. The 2.4 internal radio that will communicate with the Trimble S6 robotic total station is only available in the Trimble Survey Controller, Survey Pro and Access data collection software. The ranger offers a receive only 450-470 MHz radio that receives GPS corrections ...

    » View Answer

• Equipment Repairs

  • » I have a TSC2 that needs the keypad replaced as well as a dead spot on the touch screen that needs to be fixed. What would be the approximate cost and time to fix these problems?

    2 days, 3 hours ago

    If you make an appointment, we can turn it around in 24 hours. Otherwise it's a 2-3 day turnaround and it will cost approximately $1200.00. Give us a call. 512-282-4099

    » View Answer

  • » My Nikon DTM 310 is not sending the info to my data collector. I tried changing the cable of connection, I used another data collector and neither worked, so by doing that I noticed that the problem is in the instrument (NIKON). How can this be fixed????

    1 week, 3 days ago

    It sounds like the communication port is bad. The parts are still available to replace the data port assembly. It could be a couple of things. It would be best to send it in and get it checked out. Give us a call. 210-490-4604 and ask for Stan.

    » View Answer

  • » I have a TSC2 that has needs to have the keypad replaced. How much is one going to cost and can I replace it without sending it in?

    1 week, 4 days ago

    It's definitely not something you can do yourself. Our turn around time is approximately 3 business days and the same day if you call before for an appointment. The cost is approximately $600.00. Give us a call. 512-282-4099.

    » View Answer

  • » How much for a new TSC2 screen and key pad?

    1 month, 1 week ago

    Approximately $1200.00 to include labor. We can turn it around in a day. Give us a call 512-282-4099.

    » View Answer

  • » I have a Geodimeter 400 that needs reprogramming as well as the internal lithium battery replaced. Assumption is made that other diagnostics could be required during this process. Do you service this type and can you offer a ball-park cost. thank you

    1 month, 3 weeks ago

    If the instrument has gone completely brain dead it will cost about $500-$600 to have them replaced and re-programmed and diagnosed for other problems. If nothing additional is wrong with the instrument that should be all the charges you'll incur. There are only a few technicians left in the country ...

    » View Answer

  • » I have a Topcon Total Station 1200 series but of late it failed tracking, so what will be the problem and how much can it cost me repairing it?

    2 months, 3 weeks ago

    I would suggest you contact your local Topcon dealer.

    » View Answer

  • » I have a Topcon laser Rod Eye Pro that has got wet and quit working. Can it be Fixed?

    3 months, 1 week ago

    We would have to see it and open it up to see how much water damage was done. Give us a call. 512-282-4099

    » View Answer

  • » Can you replace the front housing (key pad) on the TSC2? If so how much would that cost?

    3 months, 2 weeks ago

    Approximately $630.00. Give us a call to discuss further. We're happy to help.

    » View Answer

  • » I have a Sokkia C32 builders level and the spindle it rotates on is not at a true 90 degree angle to the instrument . Can this be repaired and how much would it cost?

    3 months, 2 weeks ago

    If you have a bent spindle you may have damaged the compensator as well. It would be impractical to quote any repair without seeing the instrument. We would be happy to give you an estimate if you would like to send it in.

    » View Answer

  • » I have a Geodimeter 620. The power plug 4 prong connector is worn in the base of the unit and needs to be replaced. Is it possible to purchase the entire female plug unit that is held by two screws without sending in instrument? Please advise.

    3 months, 3 weeks ago

    Yes, but be advised, we do not allow for the return of any electronic parts and if your instrument is in warranty the warranty will be voided. Be aware that it is possible to plug the new connector upside down and this is a fused circuit that protects the major ...

    » View Answer

  • » What is cost for TSC2 screen replacement?

    4 months, 1 week ago

    $867 total(parts + labor). Give us a call to schedule a time slot for the repair. If scheduled, we can turn it around in a day.

    » View Answer

  • » We have a Trimble 5603 total station and can not seem to be able to get our TSC2 with an interanl radio to hook up. The total station radio connects without a problem but we have yet been able to get the TSC2. We have matched another TSC2's setting to this TSC2 but no luck. Any suggestions?

    4 months, 2 weeks ago

    Couple of questions, are you running Survey Controller or Survey Pro on your TSC2? Are the versions the same on the data collectors you are comparing? Are you just wanting the data collector to connect to the instrument or are you trying to communicate through the internal radio of the ...

    » View Answer

  • » What is your price to replace the internal battery in a 5603 Robot?

    4 months, 3 weeks ago

    In this case we recommend a ‘Limited Overhaul’ which includes. Internal battery replacement Horizontal/vertical collimation Tilt axis collimation Tracker collimation Lubing the servo motors Tuning the radios Checking the EDM/distance checks Overhauling the tribrach Checking all gaskets Cleaning the instrument Calibration card(if requested) This service runs for $595+$16 for the ...

    » View Answer

• GPS Systems

  • » Can you get a GPS lock when it's really cloudy?

    4 days, 10 hours ago

    GPS signals are not affected by rain, clouds, or even fog. However, a clear view of the sky is required.

    » View Answer

  • » Is it is possible to upgrade a Trimble R8 mk1 to recieve glonass?

    3 weeks ago

    Unfortunately no, you would need to upgrade to the R6 units or the R8 Model II or Model III. Please contact us if we can be of any assistance. Thank you.

    » View Answer

  • » I'm working with a client on a very large highway project that is going to go Trimble Machine Control. My firm will be doing the layout the bridges and sewer/paving. Our problem lies in that Tribmle is not cross over friendly with site work and surveying. We run R8/M3 via 450/470MHz. I need to get the R8's over to 900MHz to work together with the machines and the site. I don't want to go SPS as its a step backwards and we already tooled with 6 such R8's. (not a small investment) So bottom line can to swap a SPS 900 radio with a R8/M3 as Trimble does not offer the 900 for there survey side. Yes I can set up my own base or go VRS but we need no added issues. Also I understand there are code issues over mixing SBS900 with Survey Controller. Thanks

    3 weeks, 4 days ago

    Yes, you can hot-swap 900 MHz radios with the 450 MHz radios. Cost is about $3500

    » View Answer

  • » I have a 5603 DR 200. I also have a second 5603 DR200 that is not working, but has a tracker unit. Is the install of the tracker on my working unit straight forward? Does the instrument also need a firmware update? Where I live Trimble no longer support the 5600. My question the other day about the 5700 error log problem I solved by downgrading the firmware download and the download a freash copy of the latest firmware I am allowed. No error log and it is working fine. Thanks for your help.

    4 weeks ago

    Based on your question, it may be best to contact our service center at 512-282-4099. We will still support the 5600 series as long as Trimble has the parts in stock to repair them. Martin Instrument is a Trimble Authorized repair center so we have permission to perform the tracker ...

    » View Answer

  • » I noticed the 5600 2.4 GHz radio question of the 10 January. Must the 2.4 GHz radio be used with the Geo 600 in the 450 MHz band or does it need an upgrade as well? I was a bit confused by your answer. If that is so then what is the point of upgrading?

    1 month ago

    You can use the instrument with the 450 radios. The 450 radios are currently available but I expect them to be phased out in the near future. Once they are phased out the only option you will have if one radio fails is to replace both the internal radio on ...

    » View Answer

  • » I have a spectra physics laser and wondering if you repair them?

    1 month, 1 week ago

    Yes, we do. Give us a call at 210-490-4604 and ask for Stan.

    » View Answer

  • » I am looking for a system that will allow me to put down a receiver and from a distance, within 10-25 cm accuracy, tell me exactly where the receiver is. What do I need?

    1 month, 2 weeks ago

    You can achieve those accuracies with an L1 mapping unit receiving differential corrections from a geo stationary satellite such as Omni star. Trimble has a mapping unit called the Geo Explorer that can do this. Ashtech (a Trimble owned company) also has a product called the mobile mapper that will ...

    » View Answer

  • » I am looking for a key pad (V1) for a Sokkia set 4 110R. Would you have 1 or know where I might find one? This instrument is about 8 years old.

    1 month, 2 weeks ago

    I would call Hayes Instrument in Shelbyville, TN. They usually have a good selection from their bone yard.

    » View Answer

  • » I have a spectra LL 300 that won't level itself.

    1 month, 3 weeks ago

    It could be a couple of things. It is either the compensator or the I/O board that is bad or a cable inside has come loose. Give us a call at 512-282-4099.

    » View Answer

  • » Is there a pdf file with instructions on how to use and operate the Trimble handheld survey unit ?

    1 month, 3 weeks ago

    What survey unit are you referring to? Trimble has many. Most manuals can be found at www.trimble.com

    » View Answer

  • » Hello I have an older David Wright 8300. It needs calibration and possibly lens work or replacement. Cannot see cross hairs anymore. Do you have a Miami location?

    1 month, 3 weeks ago

    The older David White 8300 levels had a coating on the lens that starts to deteriorate and leaves a film on the lens that can't be repaired. There are no parts available for that model any longer.

    » View Answer

  • » I have a Trimble multi channel 360 prism for the ATS. Will it work with my 5600 DR200? Trimble 571181586 MULTI CHANEL TRACK TARGET ATS 360 ROBOTIC

    2 months, 1 week ago

    Yes, it will follow the infra red signal being broadcast from that unit. Be careful and check the prism offset and make sure it's dialed into the instrument.

    » View Answer

  • » Geo explorer CE series has been idle for over 4 years. The battery is not taking a charge. Sometimes it will come on when first place on charger then it goes off. Can't turn on using switch on button. Do I need a new battery? Where I can I purchase one on line?

    2 months, 1 week ago

    I would contact a company by the name of Tri Global. They are an excellent Mapping Distributor for Trimble. They have an office in Atlanta and San Antonio.

    » View Answer

  • » My Nikon DTM-521 has been locking up the last week. Weather has not been below freezing and I have to disconnect battery to wake it up again and it just locks back up when I try and shoot a distance. I have deleted all the stored jobs and calibrated in the "menu" and I'm lost now. I looked in my owners manual but there is no "troubleshooting" in it. I also sent it off last year to have professionally calibrated. Any ideas.

    2 months, 1 week ago

    If it is locking up during distance measurement it could be a gray wedge of something else with the EDM. Does it lock up if you set it up indoors? One trick is put it in your freezer overnight and see how it does in the morning. Most freezers are ...

    » View Answer

  • » Trimble S-6 and TSC2 have been working great, out of the blue I keep getting radio link down at 100'+/-. All batteries charged and channel and ID match. Any Thoughts?

    2 months, 2 weeks ago

    Try changing the radio setting to a different channel. If not that, then it's probably the antenna. If you're still having problems, give us a call. 512-282-4099

    » View Answer

  • » My Geodimeter 600CU stopped working. When it's on the total station, it just blinks the back light. When connected to the PC, it puts a message on the display which says: LOAD PROGRAM. What is the problem and how can I fix it?

    2 months, 2 weeks ago

    Sounds like the internal battery is exhausted. You will need to send it to an authorized Trimble repair center to have the battery replaced and software reloaded. We are happy to do that repair for you. I’m surprised the message is LOAD PROGRAM, I would expect it to display Info ...

    » View Answer

  • » How do I find out what version of software/hardware version is on my Trimble R8 GPS receivers?

    2 months, 2 weeks ago

    Download Winflash: http://www.trimble.com/pathfinderproxrt_ts.asp?Nav=Collection-54070 Connect the R8 receiver to the desktop via USB and 7 pin Lemo/9 pin DB9 female Select a serial port Choose Trimble R8 Receiver Tap Next > Verify GPS software version > Next > Finish

    » View Answer

  • » My builder's level won't stay level when turned off it's original position. I tried tuning it level by adjusting the screws at 90 degrees but it keeps going out as I turn it. Is there a trick to fixing this? Thanks

    2 months, 3 weeks ago

    The level is way out of calibration, even if you get it level it would most likely be out of calibration. Give us a call. We're happy to help.

    » View Answer

  • » Do you sell the new trimble base radio that conforms to the FCC Bandwidth rule?

    3 months, 1 week ago

    Yes. The new Trimble TDL 450 complies with the new 12.5 MHz channel spacing FCC regulation. A license is still required with the FCC. Older radios are grandfathered compliant until the year 2013.

    » View Answer

  • » I am currently using the Survey Pro version 4.4 program and I need to know if I can setup at any location within the jobsite to get the points to figure out a layout?

    3 months, 1 week ago

    Sounds like you want to perform a resection. This is when you set up the instrument in a convenient spot for layout with unknown coordinates then establish your instrument location by measuring to at least two other known points. The answer is yes, Survey Pro has the ability to do ...

    » View Answer

  • » Do you have a 2' TNC to TNC cable?

    3 months, 1 week ago

    Yes. It is $43.95. Give us a call. 512-282-4099

    » View Answer

  • » What kind of battery is the internal battery of 5600 Trimble instrument?

    4 months ago

    It's a lithium-ion battery and can only be replaced in an authorized service repair facility.... like ours. Give us a call and we can turn it around for you in a day.

    » View Answer

  • » Do you have an office location in the New Orleans, LA area?

    4 months, 1 week ago

    No, we don't. We have offices in Austin and San Antonio. Depending on what you need, we can probably still help you. Try us.

    » View Answer

  • » Good Afternoon, I am looking for a MSDS sheet for internal and external batteries used with the Trimble 5600 Total Station. Is this something you can provide me with? my email address is steven.malin@starnetgeomatics.com Thank you for your help.

    4 months, 1 week ago

    Sure. We have it. Give us a call at 512-282-4099.

    » View Answer

  • » I need a laser measuring device that will measure straightness and elevations of either Train rails or Crane rails.

    4 months, 2 weeks ago

    Yes, Trimble recently purchased a company that designed a rail monitoring system. It has the ability to measure the track width as well as elevations along the track. Link provided: http://www.sinning.de/de/newsartikel.shtml Hope this helps.

    » View Answer

  • » Do you sell Trimble Geomatic Office and Trimble Access software?

    4 months, 2 weeks ago

    We certainly do. Give us a call. (877) 309-4099

    » View Answer

  • » My Trimble TS305 does not like to work in warm weather. It displays an error message 042. Can this be repaired and how much will it cost?

    4 months, 3 weeks ago

    It is an EDM failure and the parts are very limited. Trimble would need to see the instrument to determine if they have all the parts they need. it would cost approximately $2500 to 3500 to repair it .

    » View Answer

  • » We are interested in precise GPS measurement of a vehicle moving from a few MPH to up to 70 MPH. I know Martin primarily provides surveying instruments but are there any data collection systems that would help solve this? we are interested in short-term (rental) solutions. Thanks!

    4 months, 3 weeks ago

    We definitely have systems that can give you precise measurements when moving, but speed is going to be a factor in the accuracy of the data you are collecting. If you are moving at 70 miles an hour, you are traveling over 100 feet per second. GPS measurements are typically ...

    » View Answer

  • » How does the base, rover and controller work together to ensure GPS point positioning?

    4 months, 3 weeks ago

    They work very well together. Go to www.trimble.com to see a GPS tutorial? You can find it on their home page.

    » View Answer

  • » I run the Focus Spectra Precision 10. I have a 3 battery pack that powers it but the batteries don't last for a 12 hour day so I bought the gator clip cord to run from a 12V battery. My question is how do I connect the gator clip cord to run the instrument as you need the 3 battery pack to connect the collector to the instrument so you can start it? I have tried using the gator clip cord and just connecting it to the 3 battery pack on the other side(as there are 4 ways to connect to on the 3 battery pack) and it just doesn't connect the power. Hopefully you know what I am talking about with this question.

    4 months, 3 weeks ago

    The four connectors on the battery three pack are not interconnected. Easiest solution is a three way cable, one to gator clip 12v battery, one to instrument and one to 9 pin serial. We can have it made for you if you like. They are approximately. $250.00.

    » View Answer

  • » I am an engineer and want to do a topo survey of my mom,s property. I have a survey. need contours. What do you suggest?

    4 months, 3 weeks ago

    If you want to work alone you will need a robotic or GPS instrument. If you have someone to hold the prism pole you can use a conventional total station. The technology choice will be determined by the environment. If you have a lot of thick canopy GPS is not ...

    » View Answer

  • » Do you offer beginner classes for Trimble GPS?

    4 months, 3 weeks ago

    This depends on the knowledge you hope to gain. If you are specifically interested in how to operate Trimble GPS equipment then yes, we can help you with that. If you are interested in the theory of GPS, I would encourage you to start with the GPS tutorial available on ...

    » View Answer

  • » Does the Trimble R3 really obtain sub centimeter accuracy? If so, will it perform under tree canopy?

    4 months, 3 weeks ago

    The R3 will deliver subcentimeter accuracy in a static mode or very close to centimeter accuracy in a Post Processed Kinematic mode. In both cases, data will need to be processed through Trimble Business Center to deliver this accuracy. It is not an RTK solution. Tree canopy will adversely affect ...

    » View Answer

  • » Do you offer replacement parts for Sokkia Total Stations? Specifically, I am looking for a lens cap for a Set530R3.

    5 months ago

    Unfortunately we don't have any and don't carry them. You can order it from any Sokkia dealer. The part number is 512-5206 OBJECTIVE LENS CAP. They sell for around $3.00

    » View Answer

  • » What is the difference between gps receiver and gps rover

    8 months, 3 weeks ago

    A GPS receiver can be a rover and visa versa. A rover means that it is kinetic, or “moving point to point” making measurements. It requires an internal radio or GSM module to receive correction from a base receiver. The base GPS receiver is static or not moving.

    » View Answer

  • » With trimble R8, how many seconds or minutes it take to coordinate a station?

    8 months, 3 weeks ago

    Thank you for your question but I need you to be more specific. Collection time and accuracy go hand in hand. Baseline lengths are a part of the calculation as well. I can calculate a position with as little as 1 second of data or I could collect for hours ...

    » View Answer

  • » Can you connect between a Topcon GPT and Trimble Survey Controller software or Trimble Survey Access, using Bluetooth.

    8 months, 3 weeks ago

    » View Answer

  • » Do you lease the Spectra Precision Epoch 50? If so, what would the cost break down be?

    8 months, 3 weeks ago

    For a $24,000.00 Epoch 50 the payments would be $718.61 for 36 months. There is a 10% down payment required of $2400.00 and a 20% buyout at lease end of $4800.00. The beauty of Martin Instrument's lease plan (Freedom Lease) is that you can return the equipment at any time ...

    » View Answer

  • » What is the accuracy of the Trimble R3? There are references in the literature to post-processing. Where does the data come from for post-processing (i.e. do I need another receiver)? Can I use the R3 to record and label 200+ points in the field? When I return to the office, can I download those points into the Trimble office software and use that software to measure distances between the points? How long to I need to remain at each point to get <1m accuracy? 30 seconds? 5 minutes?

    8 months, 3 weeks ago

    » View Answer

  • » Can I run a SPS930 (like S8?) on Trimble Access or Survey Controller? If not, can the firmware be updated to make it think it is an S6 or S8 so it will?

    8 months, 3 weeks ago

    Yes, but you would need to get the drivers to add that instrument to the data collector with Survey Controller.

    » View Answer

  • » I need to survey levels on an offshore oil platform. The work will include positioning the boundaries of an equipment protection structure and checks on levels of steel pipes and hull structures in the area. Can you reccommend appropriate equipment?

    8 months, 3 weeks ago

    First and foremost you are going to have to study regulations. What equipment will they allow on a the rig? A digital level will give you the most accuracy but positioning the level so that you can get a level shot on pipes may be difficult and placing the bar ...

    » View Answer

  • » I have been trying to find the part number for a 5800 receiver so it can be used as a rover. I want the part number to ensure the correct part is ordered. Can you please advise? Thanks is advance.

    8 months, 3 weeks ago

    The Trimble 5800 has been discontinued. The closest receiver to it is the Trimble R6. The part number for the Trimble R6 with internal radio is 450-470 MHz is R6301-51-66. The same receiver with 900 MHz radio is R6301-51-91.

    » View Answer

  • » What are the possible reasons for receiving such radio errors?*RAdio link down) I use it in collaboration with NetR8 receiver. The performance had been okay until two weeks ago. Each time I use it in open areas, it keeps on saying "Radio Link down". It's making my work to take longer than necessary. I don't know why and there is no infor on the same subject. Please help

    8 months, 3 weeks ago

    Radio link down means that the rover has lost the signal that the base receiver is transmitting. Some of the more common reasons for this is the environment. Radio technology is line of sight. This means that theoretically you could pull a string line from the broadcasting antenna to the ...

    » View Answer

  • » Do you have a monthly rental rate on your R8 units?

    8 months, 3 weeks ago

    The RTK Complete R8 System rents for $1295 per week or $5180 per month. Please let us know if we can assist you with anything further.

    » View Answer

  • » If I lease the Trimble R6 pkg, does it come with a base and rover?

    8 months, 3 weeks ago

    Yes, it does. Please contact us to begin your leasing process. A credit application that can be downloaded from our "Forms" page will be required. Thank you!

    » View Answer

  • » WILL SPECTRA PRECISION SURVEY PRO SUPPORT/WORK WITH TRIMBLE 5800 GPS WITH 900MHZ INTERNAL RADIOS?

    8 months, 3 weeks ago

    » View Answer

  • » is the R8 GNSS compatible with the Carlson Survey software?

    8 months, 3 weeks ago

    No, but Carlson can request from Trimble an SDK kit (software development kit)for the purpose of interfacing their software with Trimble's equipment.

    » View Answer

  • » Can I use an antenna that is for frequencies 450-470 with my Trimmark III that has frequencies 430-450? If not, do you sell the antennas for frequencies 430-450?

    8 months, 3 weeks ago

    You can use it but it is not the optimal antenna. Whip antennas can be trimmed at the base to tune them to the frequency radio they are paired with. Of course once they are trimmed they are only good for that radio. I would recommend that you have the ...

    » View Answer

  • » is this brand new..give me the complete list of trimble R8 equipment and accessories available

    8 months, 3 weeks ago

    » View Answer

  • » Need a Trimble S6 backup battery change after some period ,(like the model 5600) every 2years or not? thanks for answer milan

    8 months, 3 weeks ago

    The Trimble S6 does not have any internal batteries. This does not mean that your instrument should not come in at least once a year for a clean and calibrate. Annual cleaning will help to extend the life of your instrument as well as ensure that it is delivering the ...

    » View Answer

  • » can I pay with Paypal

    8 months, 3 weeks ago

    Yes, but not through the website. Please give us a call.

    » View Answer

  • » If I have an R8 rover that has the frequency range 430-450, can I get it switched to 450-470? If so, is that a service that you can provide?

    8 months, 3 weeks ago

    Yes, this is a service we provide. Please contact me at 512-282-4099 or dang@martininstrument.com for an estimate and a turnaround time.

    » View Answer

  • » I have multiple real estate parcels. please recommend equipment to purchase model and type to produce my own surveys.

    8 months, 3 weeks ago

    There are so many variables to this question it is impossible to answer accurately. Are you wanting to work alone, are there a lot of trees on the property, do you plan to sell the property. The equipment is a important part of the survey but not the most important. ...

    » View Answer

  • »

    8 months, 3 weeks ago

    The difference between the SCS900 software and Survey Controller is that SC is geared more for the Surveyor Engineer and the SCS is geared more toward a simplified construction staking routine. Trimble has vertical markets and they sell the SCS900 into Heavy Highway and Survey Controller to Engineering. Once again ...

    » View Answer

  • »

    8 months, 3 weeks ago

    The target ID in mono directional meaning it must be facing the instrument. It emits a unique light frequency and the instrument is programmed to find the target ID then lock to the prism directly above it. This eliminates the possibility of locking onto a false target. The MT1000 or ...

    » View Answer

  • » What are the specs difference between the Trimble SPS 700 and SPS 710

    8 months, 3 weeks ago

    Mostly firmware. Trimble has creating vertical markets that instruments have specific applications. The SPS710 is basically an S6 configured a little differently. The Trimble SPS710 is an instrument Trimble configures for the Heavy Highway Division. They program the instrument to send both horizontal and vertical angles as well as slope ...

    » View Answer

  • »

    8 months, 3 weeks ago

    » View Answer

  • » What's the difference between the S6 and SPS710?

    8 months, 3 weeks ago

    Mostly firmware. Trimble has creating vertical markets that instruments have specific applications. The SPS710 is basically an S6 configured a little differently. The Trimble SPS710 is an instrument Trimble configures for the Heavy Highway Division. They program the instrument to send both horizontal and vertical angles as well as slope ...

    » View Answer

  • » I purchased 4 R8's from a municipality. I am interested in having them checked out. I just need to know they're functional and what "SPECS" these units have. Any idea of the cost just to look at a unit and verify it's OK?

    8 months, 3 weeks ago

    Yes, we'll be happy to check them out for you. To do a full functional test is $75.00 a receiver. Just give us a call and we'll take care of it for you.

    » View Answer

  • » I'm looking to rent an S6 setup for a period of 2-4 weeks (maybe longer). Our office is in Pennsylvania. Is it possible to have the instrument and accessories shipped to our location for use? Thank you.

    8 months, 3 weeks ago

    Yes, we can ship it to your office. Just give us a call when you're ready. 877-309-4099.

    » View Answer

  • » I have an account and would like to use it instead of a credit card for an online purchase for the promotional code Martin10

    8 months, 3 weeks ago

    I'm sorry... the promotion is only for online purchases.

    » View Answer

  • » where can I get a replacement disc or a download geomatic office from the internet

    8 months, 3 weeks ago

    TGO (Trimble Geomatic Office) comes with a set of registration codes to activate the software. It is easy to get a replacement disk but without the registration codes it is useless. TGO was discontinued several months ago and the replacement is TBC (Trimble Business Center) We have some leftover TGO ...

    » View Answer

  • » I see that the trimble s8 has a prism mode and a relfectorless mode called (DR). what does DR stand for?

    8 months, 3 weeks ago

    Direct Reflect. This means the instrument has the ability to measure a distance off a reflective surface without a prism. The distance measured is determined by the reflectivity of the surface used.

    » View Answer

  • » Wanting to know what all comes with the Trimble R6 GPS system (i.e. TSC2 data collector, range pole, etc.) - thank you.

    8 months, 3 weeks ago

    A typical set up includes a rover, base, TSC2 data collector & accessory kit, HPB450 Radio and field kit, & range pole w/ bipod.

    » View Answer

  • » in the sale of a new R3 system 2 pack, what did you included in this price?

    8 months, 3 weeks ago

    Two receivers and processing software plus • R3 GPS receiver • Receiver carry pouch • System field case • HI tape • Trimble Recon® controller accessory cap base • Antenna cable • Tripod bracket

    » View Answer

  • » I have 10 years experience repairing survey equipment. Is there any positions avaiable in the tampa area?

    8 months, 3 weeks ago

    We do have an opening for our Austin store. If you're interested, please call Sara Carter at 512-282-4099.

    » View Answer

  • » the receiver 5700 have off batten and blue,what is the work of the blue one

    8 months, 3 weeks ago

    When you depress the blue button the receiver will store GPS data to a memory card in the receiver. (Make sure you have a card in the receiver) This data can later be processed to determine the true GPS coordinates of the base receiver.

    » View Answer

  • » I found out that this unit is discontinued but can't find a user guide/owners manual...any idea where i can find one/link? was this unit discontinued for any specific reason/defect?

    8 months, 3 weeks ago

    » View Answer

  • » Can you guys repair Trimble 4000SSE's and Trimble 4400 receivers?

    8 months, 3 weeks ago

    No. Those receivers are very old and parts haven't been available for many years. Time to upgrade.

    » View Answer

• Lasers

  • » Is there a safety issue (eye safety) in using total station and laser equipment?

    3 weeks ago

    You should not stare into the laser. It is a visible laser so you will see (and feel) if your eyes are accidentally exposed to the laser The Trimble SPS Series DR 300+ is a CLASS 2 LASER PRODUCT The instrument contains visible and invisible laser sources • A laser ...

    » View Answer

  • » I have a trimble 1145 dual slope laser. I sent it to my local spectra/trimble dealer and was told the cant get parts to repair this unit. I was just told by a nother crontractor that in not true he just had his repaired. So my question to you is can you get partd for a 1145 dual slope? thank you johm king kingsportsinc@aol.com

    3 weeks, 4 days ago

    The only company that we know of that can work on that instrument would be; Leigh Smith- LSR Laser Repairs 813-376-8237

    » View Answer

  • » I'm looking to have my Trimble LL500 and receiver HR500 reconditioned and was wondering about pricing. The receiver will require a new on/off button along with a new touch pad. The laser need a general going over can you give me any idea about pricing...thanks Dane Weiss DWeiss67@verizon.net

    4 months, 3 weeks ago

    The cost of a clean and calibration on the LL500 is $110.00 plus tax. The HR500 is not repairable, they don't offer replacement parts on the detectors. We do have new in stock. They run from $295 to $375.

    » View Answer

  • » looking for a owners manual and if this laser had a remote

    8 months, 3 weeks ago

    » View Answer

  • » Can the laser be set up in the middle of your project when you are working with slope?

    8 months, 3 weeks ago

    Yes, it can if the intended surface plane is the same slope and direction across the project as the laser plane. However, All lasers have intersecting horizontal axis. An X, & Y. It is suggested that you align the lasers axis with the surface planes elevation breaks in the direction ...

    » View Answer

  • » I just bought a Spectra precision laser HV101 used. Brought it home and does not turn on. probably was dropped. I checked with a local repair co. and they didn't want to deal with it. I can't believe that there is no way to repair it in any way. such as, circuit board, motor,or something. please give me hope. Steve

    8 months, 3 weeks ago

    Due to the cost of replacing the compensator, the repair cost of the HV101 would be over half the value of the laser. If you would like I can check it out and give you an estimate. Please give me a call if you would like to discuss it. Thanks, ...

    » View Answer

• Prisms & Poles

  • » I had system error in my nikon dtm 521. I reset the instrument, now my distances are incorrect.

    8 months, 3 weeks ago

    Please check your prism offset and reset it, if that doesn't work you will need to send the instrument in so that we can check your EDM. Please feel free to contact Stan Denison (repair tech) in our San Antonio office at 210-490-4604 with any questions.

    » View Answer

• Rentals

  • » I would like to rent another receiver, Base Radio w/cables, batteries and antenna to establish a base on my project and use for RTK surveying for a week. Can you set me up with everything I need and how much would it be? I do have poles and bi-pods.

    8 months, 3 weeks ago

    Let us know when and where you'd like it to be shipped. The weekly rate is $1295.00/week. Just give us a call when you're ready.

    » View Answer

• Scanners

  • » We will be using your scanner for bldg exterior envelope surveys and wanted to be able to provide health and safety information to our tenants before we start. Coudl you provide us with some documentation that outlines any health and safety issues or precautions when the scanner is used for this purpose?

    8 months, 3 weeks ago

    » View Answer

• Total Station Accessories

  • » I am looking for the black box Trimble active backsight. Do you have one

    8 months, 3 weeks ago

    We do not have a used one but they are available and we would be happy to order one for you. Just give us a call.

    » View Answer

• Total Stations

  • » I have a SPS851 Base with 3.64. Need cost to upgrade to current firmware.

    1 week, 4 days ago

    We do not service Trimble machine control products. You may want to go to www.trimble.com and click on "where to buy" to locate your local machine control dealer.

    » View Answer

  • » Hi After trying everything I know to get my 5700 working I reloaded the firmware but get an error log of 0x70000001. My firmware version is 2.32 Boot 1.22 Radio 1.98b. Serial number 0220309494 It will not connect to Trimble Access via my TSC2 controller. I have no problem with my other GPS's a 4700 base with a Trimark3 radio and a 5800 rover. Please can you advise me?

    4 weeks, 1 day ago

    We advise that you take the GPS equipment in to a Level 3 certified Trimble repair facility that can properly diagnose the 5700 and data collector. Please call us or use the website to schedule a service appointment.

    » View Answer

  • » i need to adjust the tracking on the 5603. how do i do it?

    1 month ago

    What needs to be fixed with the tracking. Is it just not working? Is it tracking fine but the crosshairs are off the prism? Assuming it is one of those it will have to come in for service.

    » View Answer

  • » Can you give me a price for an S6 (SKU S6352200) with "vision", a TSC3 and a multitrack prism?

    1 month, 1 week ago

    In round numbers, with batteries, tripods and all accessories, price would be right around $40,000. Give us a call if you need additional information. 512-282-4099

    » View Answer

  • » Can a Trimble 5600 using the old style georadio 600 be upgraded to a 2.4 ghz radio and used in conjunction with the internal radio of a TSC2 or TSC3?

    1 month, 1 week ago

    You can upgrade the radio to 2.4 GHz but it will not work with the internal radio of either the TSC2 or TSC3. You must use the external Geo radio.

    » View Answer

  • » I'm having trouble getting a data collector to talk to an instrument. I have a HP48 SX with a SMI CVCE card and a Nikon DTM 300. I'm using a cable labeled Nikon. The instrument is freshly cleaned and calibrated and has a fully charged battery. The calculator also has fresh batteries. The SMI manual I'm using says the software will support Nikon TopGun instruments but doesn't specifically list the DTM 300. There don't seem to be any other parameters set in the calculator other than selecting "TOPG", and I can't find any connection choices in the gun scrolling through the function key. Any ideas?

    2 months ago

    I'm not that familiar with SMI but you may want to check the baud rate. As I remember, the Nikon worked at 4800 baud on some of their older instruments. You may want to check the settings on the instrument itself to make sure the serial port is turned on ...

    » View Answer

  • » Will Trimble Access work with Trimble 571181586 MULTI CHANEL TRACK TARGET ATS 360 ROBOTIC and the 5600.

    2 months, 1 week ago

    Not sure about the ATS. That is a Construction product from Trimble. You need a Sitech distributor for that but yes to the 5600.

    » View Answer

  • » I need to connect my TSC2 to a Trimble 600 georadio. I need to connect robotic to my 5600. What cable do I need and do you have one?

    2 months, 1 week ago

    The cable from the TSC2 to Georadio is part number 148-SCGEOD600STRT. It is on our website.

    » View Answer

  • » Is it possible to use the SPS 710 with the TSC2 data collector?

    2 months, 1 week ago

    Trimble strives to keep construction products separate from survey products. The SPS is a construction product. If you beg and plead with Trimble they may give you the drivers necessary to allow the two to communicate.

    » View Answer

  • » How do I install a 90 degree eyepiece onto a Trimble 5600?

    3 months ago

    You have to unscrew the straight eyepiece. This can be tricky. Don't turn the small diameter eyepiece, turn the larger black ring that is flush to the instrument. It has two aligning pins, notice them as you take the old one off because that is critical information when installing the ...

    » View Answer

  • » Can you run a SPS 610 with survey controller 12.49?

    3 months ago

    We don't handle machine control products. Go to www.trimble.com to find out the closest Trimble machine control dealer.

    » View Answer

  • » Will a TSC3 work with a Geodimeter 5600 or 600?

    3 months ago

    Yes.

    » View Answer

  • » Where can I buy an external radio for Geodimeter 610 - .5 ghertz?

    4 months, 3 weeks ago

    There are different versions of the external radio dependent on the country they are used in. For example: Geodimeter radios in Japan are only allowed to be .5 watt and radios in the United States are allowed to have 1.0 watt. Your question is inquiring about a .5 GHz radio, ...

    » View Answer

  • » I have a Geodimeter 422. I am receiving an "error 26", which I believe indicates the internal battery will need to be replaced. Do you service this model and what might it cost?

    4 months, 3 weeks ago

    In the beginning Geodimeter called these messages “error” and later decided it sounded bad so they changed the verbage to “info”. You are correct. The internal battery that protects programs and memory is due for replacement. Give us a call if you'd like to discuss further or you can submit ...

    » View Answer

  • » How can I bring back the lost light signal of my Niko DTM-450?

    5 months, 1 week ago

    The EDM is malfunctioning. One of the boards is going bad or the gray wedge is bad. You'll need to send it in for repair. You can give us a call or go to our website and submit a repair ticket.

    » View Answer

  • » How can I bring back the lost light signal of my Niko DTM-450?

    5 months, 1 week ago

    You will need to send it in to have the EDM checked out. That is an older model that has been discontinued with limited parts available.

    » View Answer

  • » Is possible to increase range of radio for S3 robotic? In datasheed is written 300-500m, but our results are aprox. 200m and then lost of communication, establish, lost ...etc. Do you have experience with another kind of antenna?

    8 months, 3 weeks ago

    » View Answer

  • » Will geolock work using nomad 800 with survey pro max 4.8 with focus 10? How about the 5603?

    8 months, 3 weeks ago

    » View Answer

  • » Can a Trimble S6 or 5603 be used with SCS900 v2.8?

    8 months, 3 weeks ago

    » View Answer

  • » how can i use Trimple totalstation 3603DR pleas send me owners manual to my email mail id :salu.survey@gmail.com mob:+919526514050

    8 months, 3 weeks ago

    » View Answer

  • » Can you tell me if all Trimble 2.4 Ghz radios (for a Trimble 5603 robotic in this case) are 'Global' if I buy in one country will they be O.K in another? U.S to U.K for instance. Thanks

    8 months, 3 weeks ago

    » View Answer

  • » Is there a way that i can control my Trimble M3 Total Station with a TSC2 Data Collector?

    8 months, 3 weeks ago

    Yes, the Trimble TSC2, Survey Controller will work with the Trimble M3. You may need to upgrade your firmware version. I know that Trimble Survey Controller version 12.45 has the Trimble M3 as a selectable option. If you would like to upgrade your firmware we can provide the upgrade for ...

    » View Answer

  • » Can you upgrade the 5800 to receive L1/L2 satellites ? If so how much would it cost? Regards, Dave

    8 months, 3 weeks ago

    Dave, the 5800 already tracks the L1/L2 signals. It is not possible to upgrade it to the L2C, L5, Galileo or GLONASS signal. If you see the need for additional signals, you would need to upgrade to an R8, R6, or R8 GNSS

    » View Answer

  • » Can I run Trimble survey controller (latest version) on a Trimble Recon 400x in conjunction with a Trimble 5063 robotic with external 2.4 radios?

    8 months, 3 weeks ago

    The short answer is no, Survey Controller will not work on a Recon. The latest version of SC (12.46) will only work on the TSC2 and the TCU data collectors. Survey Controller is now at it's end of life and has been replaced with Trimble Access software. Trimble Access will ...

    » View Answer

  • » can I use for Trimble GPS5800 contorler ACU with Trimple survey PRO (all module also RTK GPS registred). thanks for answer milan

    8 months, 3 weeks ago

    Yes, you can connect the Trimble ACU, Survey Pro with a Trimble 5800.

    » View Answer

  • » I have a Focus 10 ( Spectra Precision) Total station. I can not get it to connect a TSC2 (Trimble) build 12.46 survey controller. Any work around for this?

    8 months, 3 weeks ago

    The focus 10 is basically a Trimble 5600 and should be able to communicate with the Trimble TSC2 Survey Controller 12.46 version software. Are your working robotically or trying to plug directly into the Focus instrument? There are different procedures depending on your answer.

    » View Answer

  • » I am in need of routine service on a Geodimeter 610 series robot that your shop has serviced a few times in the past. David Barrow Surveying & Mapping, Inc. Key Largo www.mapthekeys.com

    8 months, 3 weeks ago

    Hi David: We're happy to help. We can turn it around in 24 hours if you call and let us know when it will be here. Ask for Dan, Kevin, or Clay in our service dept. 512-282-4099

    » View Answer

  • » Do you Lease Trimble Sps 710 Robotic Total Stations.

    8 months, 3 weeks ago

    We sure do. All the details of our freedom lease are on our webpage. Check it out or give us a call.

    » View Answer

  • » I have a Spectra Precision Georadio QL that I use with a Zeiss S-20 robotic that communicates with the instrument in all respects (turns, searches.etc.) but doesn't seem to activate the Quick-loc on the rod. The Quick-loc is funtional as it works with other radios, cables and Zeiss we have. Is this something that could repair the radio. Thanks Mike

    8 months, 3 weeks ago

    Unfortunately, I have no experience with the Zeiss robotic instrument. Years ago SMI (Surveyors Module Inc) out of Tennessee was the largest dealer of these instruments and SMI was purchased by Eagle Point Software. Perhaps Eagle Point is still supporting the software.

    » View Answer

  • » Do you handle Spectra Precision products?

    8 months, 3 weeks ago

    We sure do. Just give us a call. 877-820-9185

    » View Answer

  • » Do I need an export license for taking the Trimble 5800 to Saudi Arabia

    8 months, 3 weeks ago

    It’s always a good idea to declare electronic equipment when you enter a foreign country. Especially if you plan on returning home with it. I cannot advise you about customs. You should contact the United States Federal Government Customs Department for clarifications about proper procedures for the equipment you will ...

    » View Answer

  • » We have need to rent Total Station surveying equipment on occasion in Phoenix, Las Vegas, San Diego, Los Angeles, San Francisco, Sacramento & Seattle. Do you have facilities near these cities or an ability to ship items to these cities. If items are shipped, how are the charges handled. Is the customer charged from the day the packaged is shipped to the day it is returned or only for the days it is used?

    8 months, 3 weeks ago

    Yes, we can ship to all of these cities. The rent starts the day you receive the equipment and stops the day before we receive it back. We have a large inventory of total stations including S6 robotics. Give us a call for a quote. 877-820-9185

    » View Answer

  • » Do you calibrate and repair this instrument?

    8 months, 3 weeks ago

    We sure do. A clean and calibrate costs $195.00

    » View Answer

  • » I have two older radios: Trimble Georadio H46 B and Geodimeter Georadio 600 H25 0.5 . Can I use any or one of then with the Trimble 5600 /2,4GHz/ robotic total station? many thanks for answer milan

    8 months, 3 weeks ago

    Trimble/Geodimeter identifies the radio frequency by the color transmit diode on the external radio. Red light means 450 MHz radio and blue dot signifies 2.4 GHz. On the instrument you can determine the frequency by the radio antenna connection. A TNC connector is 2.4 GHz and a BNC connector is ...

    » View Answer

  • » I recently purchased a used Geo 600 robotic inst. but my radio range from rod to gun is only 350ft.-500ft. max. Is this normal? What can I do to increase range inexpensively?

    8 months, 3 weeks ago

    I need more to go on. What data collection software and firmware are you running? Are the radios 450 MHz or 2.4 GHz? (Red dot or blue dot transmit light on radio.) If they are red dot the transmit/receive voltage may need to be adjusted. Do the antenna’s seem to ...

    » View Answer

  • » Does the Trimble M3 have Bluetooth capabilities?

    8 months, 3 weeks ago

    » View Answer

  • » What is price to upgrade 5600 to 2.4Ghz radio?

    8 months, 3 weeks ago

    If your instrument is already robotic and you are wanting to swap the 450 MHz radios for a 2.4 MHz then you will need to replace the internal radio on the instrument and purchase a Geo radio for the rod. Round numbers you are talking about $5,000 including labor.

    » View Answer

  • » I have a geodimeter 600 with the errir Info: 21.1 RS232 8C06:0759:462. I can not do anything but turn the instrument off and then on again. What I really want to know is if there is a program to restore defaults on this instrument, or do I need to send it in somewhere to get fixed. I purchased this for resale, and I can't get past the RS-232 error. I have all cabling and batteries to allow communication with a laptop. Just don't have the program to do it. Let me know if you can help. My email is massetrecovery@earthlink.net and my phone is 413-525-0911.

    8 months, 3 weeks ago

    » View Answer

• Tribrach & Adapters

  • » Hi - we have a trimble Geoexplorer 3, and TDS Ranger data collector. Both have serial ports and unfortunately my home computer does not have a serial port. Will your Trimble Multiport adapter work for connecting both devices to the computer? Thanks, Al alelatham@gmail.com al@jeffersoncd.org

    8 months, 3 weeks ago

    » View Answer

• Tripods and Bipods

  • » Do you know where I could find one?

    8 months, 3 weeks ago

    I would first go to EBay. I have seen old fixed leg tripods 3 ½ x 8. I would also call very old established land surveying companies. Those guys don’t throw anything away. I’m sure it wouldn’t take many calls before you found someone that had the tripod in their ...

    » View Answer

• Uncategorized

  • » When we see object it seems slight green shadow around the object(on edge of the object) at the distance about 1000m and above.Is it the problem of EDM.

    8 months, 3 weeks ago

    We've been in business a long time and we've never seen an instrument cause this problem. Chances are that the lenses are dirty or that you're shooting through foilage of some sort. Do you have a clean line of site between you and the target? What type of prism are ...

    » View Answer

  • »

    8 months, 3 weeks ago

    » View Answer

  • » We have a Trimble 5603 robot.It has an engineered hole in the center of the handle on top of the instrument. We have seen in publications a GPS receiver mounted to a robot. We are interested in the adapter that seats in that hole and allows for the connection to a 5800 GPS receiver or to whatever receiver it is intended for. The hole itself is truncated having a smaller diameter at the bottom than the top. Any help would be appreciated. Thanks

    8 months, 3 weeks ago

    Trimble has never pursued the concept of the GPS receiver being on top of a robotic instrument. However, Geodimeter did several years ago. It is possible to do what you are asking but to my knowledge there is no such adapter available from Trimble. If you wanted to mount a ...

    » View Answer

  • » I am looking for a used prism rod with powerstick and rmt606 hotshoe for my geo. 600 system. Do you have one or can you refer me to someone who does?.....Thank You.

    8 months, 3 weeks ago

    It took some doing but Martin Instrument finally figured out how to re-cell the power sticks. New ones sell for $245.00 but we have like new re-celled for $150.00. The RMT 606 is a little harder to supply because you can rarely find good used ones. We have an RMT ...

    » View Answer

  • » Where is the Nikon DTM-322 Total Station made?

    8 months, 3 weeks ago

    » View Answer

  • » It is equipped with Fischer / ODU 5-pin MALE connector on one end and a DB9F connector on the other end.if the turbo sII is equal to Racal 8 gps

    8 months, 3 weeks ago

    Martin Instrument is a Trimble distributor. If you need Topcon equipment or accessories you should visit Topcon.com and find a Topcon distributor in your area for assistance.

    » View Answer

  • » do yall have carlson explorer 2

    8 months, 3 weeks ago

    No, we handle TDS Survey Pro and Trimble Survey Controller data collectors.

    » View Answer

  • » Do you sell replacement batterys for Trimble Geo XH Geoexplorer?

    8 months, 3 weeks ago

    » View Answer

  • » I have a Trimble ag132. The antenna doesn't seem to be working (I borrowed another antenna and the system works fine with the borrowed one). Is it possible to have an antennae repaired?

    8 months, 3 weeks ago

    Only the very old antenna’s (10-15 years) from Trimble allowed them to be opened and even these were rarely repairable. The rest are sealed at the factory and are not serviceable. If you could send me a photograph of your antenna and complete model numbers it’s possible that we may ...

    » View Answer

  • » I am the City Engineer for a small town in Texas. I would like to purchase a survey grade GPS system. While we have no intention of setting corners and boundaries I do want the accuracy to be on the order of sub centimeter. Our main uses will be locating our facilities, including valve boxes, manholes, fire hydrants and the like. Once in a while we may run topo for some special projects. I have owned and used GPS systems in the past so I am at least somewhat familiar with how they work. I would like to get costs on a couple of different units and include training for four to five indivdiuals. Can you recommend and also give me costs FOB Alice, Texas?

    8 months, 3 weeks ago

    We would be happy to help you, and do quite a bit of work in South Texas. Prices on RTK systems are going to vary wildly, if possible, could you give us a call at 512-282-4099 and we can discuss what you need. Thanks, Marty Richardson

    » View Answer

  • » When the total station turn on for about one mimute, an error massage appear as below. "=SYSTEM ERROR= EDM TRN TIME OUT Push any key end." What does it mean? How to solve the problem

    8 months, 3 weeks ago

    You have an instrument that will shoot a distance in both prism and prism-less mode. Perhaps your EDM settings is in prism-less mode but you are shooting a prism. In short distances it would be very difficult to get a distance because the two measuring technologies are very different. To ...

    » View Answer

  • »

    8 months, 3 weeks ago

    » View Answer

  • » Do you repair Trimble 4700 receivers. We have one that does not seem to get a satellite signal when the GPS antenna is plugged in. We know it is not the antenna or cable because they work with our other receiver.

    8 months, 3 weeks ago

    We do repair the Trimble 4700 however parts are hard to come by. We have some units available to us in our bone yard that we rob parts from but I must tell you, for practical purposes the Trimble 4700 has reached its EOL (end of life)

    » View Answer

  • » How do I run other data collector in place of Geodatwin for Geotracer 3220 dual Freq, DGPS

    8 months, 3 weeks ago

    Once your Geodatwin stops working you are at the end of productive life for the Geodimeter Geotracer 3220. Sorry! On the bright side I think you have bragging rights as the longest user of the Geotracer.

    » View Answer

  • » HOW DO I RUN A GEODIMETER 600 USING A TDS RECON DATA COLLECTOR? I WOULD LIKE TO USE THE ROBOTIC FUNCTIONS OF THE GEODIMETER 600.

    8 months, 3 weeks ago

    Check the data collector under registered modules and see if robotics is active. If not you will need to purchase the robotics module and install it on your data collector. Martin Instrument is a TDS distributor and we are happy to help you with this. If you currently own the ...

    » View Answer

  • » Can the red flashing diodes in the RMT 604 be replaced? Or can the cicuit board be replaced? Or do I have to replace the complete RMT 604?

    8 months, 3 weeks ago

    The RMT 604 is the old style RMT that does not have the hot shoe connection in the bottom of the target. Yes, the RMT diode board can be replaced. Martin Instrument is a level three service center for Trimble and we would be happy to do that repair for ...

    » View Answer

  • » What is a T-C correction?

    8 months, 3 weeks ago

    You’re not giving me much to go on but if that’s all I have to go on I say “Temperature” and “Earth Curvature” correction.

    » View Answer

  • » Will a multiport adapter allow me to transfer data from a Ranger with a 26 pin connector to a USB port on my laptop and will I need Active sync or any other software to complete this function?

    8 months, 3 weeks ago

    You may be better served to use the 9 pin serial port on the data collector. To do this you will need to purchase a USB to serial convertor software to run on your computer. This software should come with a pigtail cable that is USB to 9 pin serial. ...

    » View Answer

  • » Hi Marty, I have bought a 600 robotic as a backup for my S8. On field testing it over the last few days I find it very slow to record stake positions in "Stakeout a Road" The latency can best be described in 2 parts 1. Updating Station and Offset takes 3-4 seconds after moving even a short distance of say 200mm. 2. When recording a stake out point it takes a minimum of 5 seconds for it to store the shot. If I try to move after hitting the enter key it will quite often record a position of the prism in the middle of this move. 3. When initiating the "search" command it seems to take about 10 seconds for the instrument to start searching. I'm not sure if it is latency in the radios or whether tits because the ACU computng power is slowing it down. The Roads are 250 to 350KB. Thanks for your help ...regards Ken

    8 months, 3 weeks ago

    This is a tough one. First I would check your survey style and make sure the update rate is not set to 2 seconds, it should be set to never. I am assuming that the robotic instrument is in TRK mode with the EDM. I don’t think the size of ...

    » View Answer

  • » When trying to connect the tsc2 to the 5600 to go wire less the radio channel keeps changeing to 9 instead of staying at 1

    8 months, 3 weeks ago

    A few thoughts……. Are you running Survey Controller Software or TDS? (Tripod Data Systems)? When you create the survey style are you remembering to accept and store before exiting? Have you tried connecting the data collector to the instrument with a Y cable or a Trimble battery pack for initial ...

    » View Answer

  • » what is the newest version in the tsc2 data collector you can use to connect to the 5600 robotic is 12.46 to new

    8 months, 3 weeks ago

    12.46 is the latest version of firmware to date, and will definitely communicate with your 5603. In addition, Trimble's Survey controller will communicate with all of their legacy GPS devices except for the Trimble 4000 and 4400.

    » View Answer

  • » I AM CURRENTLY UP GRADING TO NEW GPS BASE STATION EQUIPMENT AND LOOKING TO FIND A LINK TO SELL MY USED EQUIPMENT. DO YOU HAVE ANY REFERENCES

    8 months, 3 weeks ago

    There are several outlets available to you. POB (Point of Beginning) magazine has both online classifications as well as printed adds in their magazine. Professional surveyor magazine offers the same. Many find EBay and Craig’s list a good outlet. Here at Martin Instrument we offer you an outlet with our ...

    » View Answer

  • » Hi Marty, Is it possible to do this? If so could the instrument then be able to communicate with the TSC2 with integrated radio? I'm not sure if you are familiar with SCS900 software or not. The question is can you when resecting use a 3rd control point using only 2D ie angles only measurement as one can o survey controller. Thanks so much...regards Ken

    8 months, 3 weeks ago

    Yes, we can upgrade an existing Trimble 5600 460 MHz radios to the newer License free 2.4 GHz. Unfortunately the Trimble 5600 radio’s are not compatible with the newer internal radio currently utilized in the Trimble S6 and TSC2. Let me ask around about the resection with angle only using ...

    » View Answer

  • » Do you Carry a C59 Rod Clamp for a HR350?

    8 months, 3 weeks ago

    We sure do.... It's $25.00 and it's in stock. Give us a call. 877-820-9185

    » View Answer

  • » I have equipment that I need values on? Trimble Total Station 3; System W/STI-00021 Tripod Model TRI-560374. 2) 5603 DR200+ Robotic Reflectorless EDM #63322815 3) GPS Antenna (Base Station) #0220080635; GPS Antenna (Rover) #0220079605; Base Receiver #3711A18737; Base Radio 4) Nikon DTM 520 Total Station #D30303-two of each. Can you help me out or tell me where to go to get values? All equipment is less that 4 years old.

    8 months, 3 weeks ago

    Surveying equipment like anything else is worth what someone is willing to pay. You will find a wide range of pricing on all the equipment you have listed. Because of the economic downturn we have experienced for the past 18 months or so there is an abundance of good used ...

    » View Answer

  • » My instrument will power up but the screen is blank and won't repond to keypad controls, WHAT'S WRONG....DESPERATE

    8 months, 3 weeks ago

    Sounds as though the display assembly is bad or the ribbon cable that attaches it to the board may be loose. Send it to us for an estimate. Martin Instrument 12077 Starcrest San Antonio, TX 78247 Attn: Stan Denison

    » View Answer

  • » Nikon Digital Theodolite - Model NE-20S-20SC this unit beeps when powered on shows no diplay, I won this unit in auction do not no the first thing about them help....

    8 months, 3 weeks ago

    Either the display assembly is bad or the ribbon cable is defective. Unfortunately, this model has been discontinued for serveral years with no parts available.

    » View Answer

  • » How can I do to introduce coordenates in trimble MS750 to unkown point

    8 months, 3 weeks ago

    Martin Instrument does not handle Trimble machine control products. I would suggest that you go to www.trimble.com to find a dealer that handles this product.

    » View Answer

  • » i cant turn on the total station only flashing the display but does not turn on, the battery is ok. what happend

    8 months, 3 weeks ago

    It sounds like the ribbon cable that connects the battery compartment to the power board is going bad. I would try running power from the power port on the instrument to test it. If it powers up and works then you know the battery ribbon cable is bad. We have ...

    » View Answer

  • » I work in concrete, steel and earthwork construction and didn't know which program would best serve my needs.

    8 months, 3 weeks ago

    The Trimble TSC2 is hardware. The two surveying programs that run on the TSC2 are Trimble Survey Controller and Trimble Survey Pro. The difference in these two software packages are Trimble Survey Pro is the original TDS software. Trimble purchased Tripod Data Systems several years ago. Trimble Survey Controller was ...

    » View Answer

  • » How can I upload XYZ data to DTM 522, I follow the instruction from help menu, but still I cannot upload my data from PC to the DTM 522

    8 months, 3 weeks ago

    The first thing I will need to know is what tools are you using to attempt the transfer? The software that Nikon provides is Connex File Transfer Software. The catalog number for this product is PCS-CONNEX. The serial cable they offer is RS232C Cable Total Station to PC catalog number ...

    » View Answer

  • » I was wondering if a 3306DR total station can be modified by a Trimble dealer to be robotic.

    8 months, 3 weeks ago

    No; only the Trimble 5600 servo driven instrument and the Trimble S6 magnetic drive instrument can be upgraded to full robotics. If you have either of these instruments our Trimble factory authorized level 3 service center can do the upgrade for you.

    » View Answer

  • » I considering buying a RTS 555 or a 5603. Looking to use it for site construction. Which one will provide less problems and cost. Looking to use LM 80 on either one.

    8 months, 3 weeks ago

    The RTS 555 is better unless you are working on extremely large sites that require measuring distances over 1200 feet. The RTS 555 utilizes internal batteries that make it much simpler to set up. It utilizes Wi-Fi to communicate to the rod/data collector which is a more robust solution and ...

    » View Answer

  • » Where is the Nikon AX-2S-20X made?

    8 months, 3 weeks ago

    All the Nikon low power construction levels are made in China – AX-2S, AC-2S and AP-8. The high end are made in Japan – AS-2/2C and AE-7/7C.

    » View Answer

  • » I wish to know if the the Recon can be updated to the latest LM80 software.

    8 months, 3 weeks ago

    » View Answer

  • » is the pointer laser adjustable so you can see it better

    8 months, 3 weeks ago

    No, you cannot adjust the laser pointer. It is factory set. The FCC will not allow it to be over 1 milwatt.

    » View Answer

  • » How do i calibrate a HV401

    8 months, 3 weeks ago

    The best way is to send it to us for calibration but if you'd like to do it yourself send me your email address and I'll send you the manual.

    » View Answer

  • » Hello I have the Nikon NE-10L Theodolite. There is a slight sign of the crosshair in the lens but not useable? Ideas? Thanks Alan Rockwood alanskip@hotmail.com

    8 months, 3 weeks ago

    It sounds like a lens separation in the eyepiece assembly or a lot of dirt. We can take a look at it if you'd like to send it to us but unfortunately, due to the advanced age of the instrument, there are no parts available.

    » View Answer

  • » I wish to purchase a data controller for layout as a heavy civil contractor (concrete, steel, embeds, piles, excavations, etc) and I'm wondering what the advantages and disadvantages are between the two controllers.

    8 months, 3 weeks ago

    The Trimble TSC2 is hardware. The two surveying programs that run on the TSC2 are Trimble Survey Controller and Trimble Survey Pro. The difference in these two software packages are Trimble Survey Pro is the original TDS software. Trimble purchased Tripod Data Systems several years ago. Trimble Survey Controller was ...

    » View Answer

  • » I'm trying buy a robotic total station on a budget: I was thinking of buying a new LM80 controller and a Trimble 5600 series total station that has been upgraded to robotic status. Is this a good idea? Or do you have any recommendations? Thanks.

    8 months, 3 weeks ago

    Buying the new LM-80 is a good idea because that will insure that you have the latest firmware. The 5600 is a proven workhorse of an instrument and you can never go wrong with that instrument. Knowing the history of the instrument is important. I have found some companies reselling ...

    » View Answer

  • » Does the TSCe collector support this upgrade? What does it take to retrofit and do you sell the items necessary? The Trimble 5600 Total Station supports the latest Trimble controllers and field software. This enables you to benefit from innovative new software features such as GPS Search technology. Trimble GPS Search technology uses GPS to guide your 5600 instrument to the robotic rover pole in seconds. GPS Search removes the hassle of lost target lock, and makes robotic surveying even more efficient. GPS Search uses GPS positioning to locate a prism anywhere, anytime, so that with a Trimble I.S. Rover, or even a GPS card, or Bluetooth receiver, the 5600 Total Station will

    8 months, 3 weeks ago

    No, unfortunately the TSCe will not support this feature. You will need to upgrade to the Trimble TSC2 data collector in order to take advantage of GPS search. Once you have the TSC2 you can install a L1 GPS CF card type 1 in one of the expansion slots of ...

    » View Answer

  • » When I boot up I get a "Internal Battery has expired" message, but the gun works fine. The manual shows you can have an internal Bat, or a track light, or Autolock, I have Autolock. Where would the internal Battery go and can I insert this myself if purchased from you. Do I need the special tool (Allen Wrench type)?

    8 months, 3 weeks ago

    The internal batteries can only be replaced by a certified Trimble Service Center. The back-up batteries store the firmware running on the processor board of the instrument. When the batteries are replaced or die on their own, the instrument firmware and constants have to be reloaded via Trimble's proprietary Service ...

    » View Answer

  • » How can I purchace a battery for my Nikon 522 and how much is it?

    8 months, 3 weeks ago

    The battery is $432.00. Just give us a call at 877-820-9185

    » View Answer

  • » What do you need in order to link a TSC2 to a Trimble 5600 Robotic Total Station? Thank You

    8 months, 3 weeks ago

    This depends; if you want to connect the TSC2 directly to the instrument you have several options. The cable needed from the TSC2 is part number 148-SCGEOD600STRT. Now comes the tricky part. If you are running a Trimble 3 pack battery holder no problem, just plug the TSC2 cable directly ...

    » View Answer

  • » WE BOUGHT A R8 GPS RECEIVER WITH BLUETOOTH AND GSM RADIO.THE UNIT WAS MANUFACTURED IN 08. WOULD THIS BE A MODEL 2 AND GNSS CAPABLE RECEIEVER.

    8 months, 3 weeks ago

    » View Answer

  • » I have been given a Trimble GPS tractor navigation system,,, all the numbers I can find is PN 200-00, 022102, and n324,,, need some info on this product if possible Larry Malone e-mail brenda_memaw@yahoo.com thanks for any information

    8 months, 3 weeks ago

    This sounds like an agriculture product and unfortunately we don't carry any of the Trimble agriculture products. I would suggest you go to www.trimble.com and find a distributor close to you.

    » View Answer

  • » I enter points from a CAD file then check the distance, it's wrong. I am entering the correct conversion factor/scale.

    8 months, 3 weeks ago

    » View Answer

  • » Hi, Is there any way that i can connect my Tsc2 to a 3rd party GNNS receiver. I am using an S8 but have a Javad RTK system. Thanks for your help!

    8 months, 3 weeks ago

    Trimble Survey Controller does work with some third party conventional survey instruments but I do not believe they have any drivers for competitive GPS receivers. There is a possibility that Trimble Survey Pro (Tripod Data Systems) may be able to communicate with the Javad receiver.

    » View Answer

  • » WE RECENTLY PURCHASED A GPS RECEIVER VIA EBAY ,A R8 GPS RECEIVER. WHAT ARE THE MAJOR DIFERENCES FROM A 5800 GPS RECEIVER AN A R8 RECEIVER. THE R8 GPS DOES NOT NESSECARILY HAVE GNSS CAPABILTIES.

    8 months, 3 weeks ago

    If you purchased a Trimble R8 model 1, the major difference between the Trimble R8 and the Trimble 5800 is that the R8 has the ability to track the GPS signal L2C. In my opinion, the L2C is not a significant feature.

    » View Answer

  • » Is there an specific cable needed to connect the Radio to a computer? I need to input more frequencies.

    8 months, 3 weeks ago

    Yes, in order to add frequencies you must have a 5 pin lemo to a 9 pin serial. If you'd like to send us the radio, we'll add the frequencies for you.

    » View Answer

  • » I have enjoyed owning the Elta S20R robotic survey system for a number of years. I recently fell and the Zeiss DLS 70 radio hit the ground very hard. The internal battery broke loose inside. It worked intermittently but with a diminishing range. It finally worked only sporadically. I had the battery pack renewed, but no improvement. I speculated that the battery may have damaged some of the wires or connections (Some were badly creased or scarred). Using a microscope, I could see that a third of the connections on one of the integrated circuits was also damaged. I repaired the integrated circuit by replacing it with a new one from the same manufacture. The two red indicator LED's light but no others. It also fails to establish a radio link between the radio itself and the instrument. I am still thinking that the wires may have been damaged. I have searched for someone that can fix this radio in the United States, but no success. Shipping of both the instrument and the radio 1,000 of miles away, (for who knows how long) would leave me without the most important tool of my work. I have tried to rent other robotic instruments, but it is a steep curve trying to learn an different instrument and data collection system. I am hoping your company may still have in it's archives a copy of a service manual for the Zeiss DLS 70 radio, or know where I might obtain a copy of one. Actually being able to obtain a service manual for both the Zeiss DLS 70 radio and the Elta S20R instrument would allow me to have the instrument calibrated and tested on a regular basis. I hope that you can provide some assistance.

    8 months, 3 weeks ago

    Yes you have a challenge on your hands. One of the larger reseller of the Zeiss instrumentation was Stanley Trent out of Tennessee. He wrote a data collection software package that ran on the HP 48 called SMI. He was very successful with the Zeiss instruments and his software. So ...

    » View Answer

  • » I AM TRYING TO FIND A TRIMBLE TMEP800L-RTS655 FOR RENT. POSSIBILITY?

    8 months, 3 weeks ago

    » View Answer

  • » Does the used Trimble TSC2 collectors come with a hardware or firmware warranty? What version of Survey Controller will be included with the TSC2?

    8 months, 3 weeks ago

    The majority of our used Trimble TSC2’s are more than a year old so they do not come with firmware and hardware warranties however they are available for purchase. The price to extend the hardware and firmware on a Trimble TSC2 is $380.00. The Survey Controller firmware version varies depending ...

    » View Answer

  • » What is the main difference between the 5603 and the S6 ? What is the main difference between the Trimble 5603 DR Std, 200 and 300 Robotic Total Station ?

    8 months, 3 weeks ago

    The primary difference between the Trimble 5600 series instrument and the Trimble S6 is the drive system. The Trimble 5600 is a servo motor drive system and the Trimble S6 utilizes a magnetic drive system. The advantages of the S6 include: faster turning speed, low power consumption and an on-board ...

    » View Answer

  • » Does your GPS BRICK BATTERY include a charger?

    8 months, 3 weeks ago

    The Trimble GPS brick battery and charger are sold separately. We have used chargers available if you would like to conserve dollars.

    » View Answer

  • » I somehow melted the cigarette lighter end of my Trimble Super Charger Cord, can I get a replacement?

    8 months, 3 weeks ago

    » View Answer

  • » I have a Tsc2 Trimble collector with survey controller software, will that talk to a South brand total station or do I have to install Survey Pro. If I have to install survey pro do I have to take survey controller off?

    8 months, 3 weeks ago

    So you’re the one that bought that South instrument. I have not experimented with the South brand of Total Stations however if you set up a Survey Style with the Trimble Survey Controller you can create a custom instrument. All we would need to know from South is the com ...

    » View Answer

  • » I'd like to buy the Trimble ACU, but I need to know if it comes with the adaptor so that I can put it on my 5600?

    8 months, 3 weeks ago

    » View Answer

  • » I am trying to Download/Upload data from a Geodimeter CU to a laptop or PC using Data Transfer. Each time I have tried to create the connection I find myself trying all kinds of variations such as removing ActiveSync, putting Data Transfer in C drive instead of C:\program files. Sometimes the connection works with no changes to the computer, other times I need to make one or a number of changes. Lately I have discovered that Trimble Geometrics Office does not work with Nortons software. Is there any correct sequence of setting up a computer?

    8 months, 3 weeks ago

    » View Answer

  • » Is there a newer geoid model available than the 99 and 03 that we have been using?

    8 months, 3 weeks ago

    Yes, the GEOID09 is a refined hybrid model of the geoid in the United States and other territories, which supersedes the previous models GEOID06, GEOID03, GEOID99, GEOID96, GEOID93, and GEOID90.

    » View Answer

  • » Our company is moving from Topcon to Trimble Machine Control. What are the Benefits of UHF over VHF? It seems Trimble's Survey equipment is all VHF based and Machine control is UHF based. We are looking to purchase 3 rovers, 2 excavator systems and 2 Dozer systems and we do not want to buy something that will be outdated in 6 months

    8 months, 3 weeks ago

    Trimble promotes the use of 900 MHz radios in machine control applications. There are several reasons for this that include; 900 MHz radios do not require FCC licensing, 900 MHz are believed to experience less radio interference, two way communication is allowed with 900 MHz radios meaning that a road ...

    » View Answer

  • » Does the S3 have the capacity to run with the GPS module for tracking, I assume it does as it is mostly controller driven

    8 months, 3 weeks ago

    Yes, the Trimble S3 can support and utilize a CF card type 1 gps receiver. This GPS target location feature, when installed in the Trimble TSC2 data collector, typically reduces your robotic search time to less than 4 seconds.

    » View Answer

  • » I have a Gl 722 and i am not sure how to use the automatic axis alignment mode, please help

    8 months, 3 weeks ago

    1) Select the desired mode from the operational mode menu using the mode button. 2) Select the axis that you are aligning using the radio remote control's up or down buttons. 3) Press the enter button to confirm the selection. 4) While the system is aligning, "Start" followed by "Wait" ...

    » View Answer

  • » We need to lease the whole set up, Rover, controller, radio, cables, ect. Need by March.

    8 months, 3 weeks ago

    Yes, we can help. Check out our rental rates on the website or give us a call at 877-820-9185. We have a large fleet of Trimble equipment available for rent.

    » View Answer

  • » I purchased two Trimble 5700 with different requency, one another and 410/430 MHz another 450/470 MHz, can I change the frequency to keep boths gps in the same frequencyt? thanks

    8 months, 3 weeks ago

    The FCC has standardized on the frequency 450/470 for the Survey and Engineering industry in the United States. The only options you have if you want to use both the receivers as rovers is to either replace the 410/430 MHz radio with a 450/470 or purchase an external 450/470 radio ...

    » View Answer

  • » Difference between the R8 and the R6?

    8 months, 3 weeks ago

    The Trimble R8 processor is slightly faster than its younger brother Trimble R6 and has more futures built into it like the ability to receive the L5 GPS signal. I promote this feature with a grain of salt because the first L5 satellite was just launched in March 2009 and ...

    » View Answer

  • » can the r8 5800 rover with L1/L2 CAPABILITITES BE UPGRADES TO GNSS CAPABLE

    8 months, 3 weeks ago

    You cannot upgrade to GNSS if you have a 5800 or a model 1 R8.  Trimble and Martin Instrument are currently offering very generous trade allowances toward the purchase of new GNSS receivers. 

    » View Answer

  • » What are the advantages of using the Trimble Multi Track target over the original Target ID and 360 prism?

    8 months, 3 weeks ago

    The Multi Track Target is an active target omni directional similar to the Trimble 5600. This means you do not have to face the instrument when the instrument is searching for the target. Both target systems allows the operator the ability to dial in 8 unique signals that customize the ...

    » View Answer

  • » What's the difference between the S3 and S6?

    8 months, 3 weeks ago

    The Trimble S3 was introduced as an affordable entry level servo instrument. Calling it a servo instrument isn’t quite accurate though because the drive system is magnetic, same as the Trimble S6. The key differences are that the S3 does not have an LED display that is used when initially ...

    » View Answer

  • » Just a test.

    9 months, 3 weeks ago

    Nice question. This is the answer.

    » View Answer

• Used GPS Systems

  • » Does your used GPS equipment come with any kind of warranty?

    8 months, 3 weeks ago

    We provide a 30 day warranty on all used GPS equipment but we can provide manufacturer's warranties at an additional cost. All of our used GPS is thoroughly checked out in our Trimble Authorized Service Facility.

    » View Answer

  • » I am purchasing a used Trimble Geodimeter External UHF 450-470 MHz Radio #270729992768. I have been told The unit was tested in Feb of this year to better than -90dB with a 5600 and a TSC2. Is this a good number for the test? What is the range? geo radio

    8 months, 3 weeks ago

    The range of a GeoRadio is approximately 1200'.

    » View Answer

• Used Total Stations

  • » I have a Nikon DTM-450 Total Station with tri-pod what is it worth in this economy?

    4 months, 1 week ago

    There is a wide range of pricing for used equipment. The only thing I remember from my economic class is supply and demand. Unfortunately, there is a lot of supply at this point. We recently sold some similar instruments for $800.00 but I have seen some advertised for as high ...

    » View Answer

  • » I have purchased some antique surveying instruments and would like to know where to go and who to contact about the selling price of these on today's market where would you suggest I go? Thanks, bjc

    5 months ago

    Your best bet is take a picture of the equipment and post it to websites such as RPLS.com Be sure and give as much information about the equipment as possible such as model numbers, serial numbers. If you can find a date on it even better.

    » View Answer

  • » I am looking for the SMI ver 7 PCMCIA card that plugs in to a Zeiss Elta S20, do you ever come across those? Glenn orsurveyor at gmail.com

    8 months, 3 weeks ago

    » View Answer

  • » what is the differance between new Trimble M3 DR 3" and Trimble 3603 3" Total station?

    8 months, 3 weeks ago

    The key differences in the Trimble M3 and the Trimble 3603 are as follows: The 3603 was a design by Zeiss and Trimble purchased Zeiss a few years back. The 3603 can accommodate both the Trimble CU data collector as well as the Trimble ACU data collector. It has a ...

    » View Answer

  • » I'm desperately looking for the control software for Geotracer. I've owned it for 7 years, and trimble or spectra precision does not give any answer to me. I have GeodatWin controller, but it also stop working. Does it need to have a software in a PCMCIA card? I don't have any PCMCIA card now. I got GeodatWin controller from Ebay to try to control Geotracer. I really need some help, please!!!!. If you have some software, can you PLEASE reply to ahnyw@hotmail.com ? Thank you so much for the help! Jason. P.S Someone in this forum ever replied like the below, so I'm assuming that there's a person who can help me somehow. HERE: All you need is a serial cable and the old DOS geotracer control program which I have. If interested, I can send it to you... I'm still using my Geotracer 3220 until now together with Leica and ashtech...

    8 months, 3 weeks ago

    I hate to be the bearer of bad news but I think you are going to have a challenge finding replacement items for the Geodatwin. The product was not well received by the surveying community so very few are out there. We had some several months ago but eventually sold ...

    » View Answer

  • » IS THE ONE YOUR SELLING HAVE THE LONG RANGE REFLECTOR LESS?

    8 months, 3 weeks ago

    It is reflectorless but limited to 150 meters.

    » View Answer

  • » Can you offer used or new radios (Trimble HPB450 and internal radio for the Trimble 5700)? If yes, what will be your price for each item? Regards

    8 months, 3 weeks ago

    We have used Trimble HPB450 radios from time to time. The average used price is $2,250 for the radio and needed cables. We can still get the internal radio for the Trimble 5700. I believe the price is about $3,000. You can also use external radios for 5700. Pacific Crest ...

    » View Answer