GPS Systems:

The Trimble 5800 Limited GPS system is an RTK system combining proven Trimble GPS technology and system design with easy-to-use software and an ultra-rugged Pocket PC controller.

The 5800 Limited combines a dual-frequency GPS receiver, antenna, UHF radio, and battery in a single compact unit. Available as a base or RTK rover, the 5800 Limited is ideal for stakeout, control, topographic, roading, and cadastral surveying on small to medium-sized job sites.

Every component of the 5800 Limited GPS system is designed to work together. It includes:

A version of the 5800 GPS receiver with special targeted features

• The popular Trimble Recon controller
• Trimble field software for your region:
  

The 5800 Limited GPS system offers:

Brochure: GPS Brochure.pdf

Datasheet: 5800 limited data sheet.pdf

• Can a Trimble Blue Cap adapter for a TSCe collector be repaired if they don't work
• Do you buy used Trimble units?
• How do I capture static data? How do I retrieve that data? Can you give me a link that will offer that info. We are going to be attempting static control with R-8s
• How can I connect my rugged handheld (win mobile with usb port only) to any total station? In this moment I am searching a software but my problem are port and cable? What cable do I need?
• I have a Trimble 4700 that I would like to configure as a base station. The problem that I have is that I have a TSCe that shows Survey controller v11.4 but it won't open and run. As a consequence I can't configure the 4700. The alternative would be to connect to a PC to do the configuring but I don't know what software would be needed on the PC to do this (and which Windows versions are supported).
• I have a Trimble 5800 system and a Trim Mark 3 radio. We bought the system new in 2005, we are starting to to have radio connection issues. Seems like the range of our system has dropped of as well. We are using the original antennas and cables. Could this be a factor ? Also, is there any (affordable in this economy) way to "boost the horsepower" with our existing system ?
• Hi All I have an assembly of GPS base (R7 GNSS-Radio TDL 450H - R8 GNSS - Controller TSC2) I want to know how to do the connection. The main problem is the frequencies I think. Help me.
• I need to rent GPS survey equipment. Do you only rent Trimble GPS?
• How can I pull off the CF card from the slot of Trimble TSC2 controller?
• Can I get firmware for Geotracer 3220?
• How do I get my R8 Model 3 receiver to transmit and change my HPB450 radio so it will receive a signal from the base and repeat, (a repeater) the signal to my Rover?
• Will the new TSC3 run a Trimble 5600 series robot ? I understand that I would have to continue to use the georadios. Thanks Steve T.
• For what application is Trimble's R3 intended? What accuracy can one expect from the instrument? Tom Rollag
• I am having issues with my Trimmark 3 Radio. I use a Trimble 5700 set up. On my radio I am getting a code that I have never seen before. It keeps flashing sync and trans in the upper right corner when the base set up is started. I should only be getting a flashing trans. what does this mean and how do i fix it? also, I have Winflash and I can connect my 5700 recievers to my computer this way but I am unable to connect my radio due to not having the Trimmark 3 available in the selection box in Winflash. how do I update Winflash so I am able to connect to my radio?
• We have a SeaFloor Systems RTK capable hydrographic unit. It looks like we need one of your GPS Base/Rover/Controller systems to make this work in real-time. Please advise as to what we need to acquire. R. Scott McClintock, Sr., RPLS, PLS Nome, Alaska
• How do I find out what version of software/hardware version is on my Trimble 5700 GPS receiver? How do connect it to my laptop using winflash? I am trying via winflash but it's not recognizing the receiver (using USB)
• Can I use a TSCe with a Geodimeter 440 or 620 to upload calculated points for staking?
• Do you rent Trimble GPS equipment? If so, how much?
• I just did a factory reset on my tds 500x ranger and now the wifi won't work. Is there something that needs to be turned on.
• How do you export a job using the trimble S6 DR plus controller in string out method to a PC??
• What is the cost for a standard calibration for a Trimble 5601 DR 200+ ?
• I am looking for the part number for the complete battery charger unit (the inner and outlet cables inclusive) for Trimble 3600 Total station series.
• How do I unlock my Trimble TSC2 controller?
• How much does an LL 500 cost?
• Does the S3 total station work with SCS900?
• Can I buy a replacement level bubble for a Sokia hand level? Just the little 1/2" glass cylinder that holds the bubble.
• How do I extract photos taken while surveying with my TSC3? Where those photos go and are they attached to the job folder?
• the trimble 5800 gps pole measures approx 1.88m to underside of receiver and the dome itself is 65mm in height? how does the gps then deduce if you are tapping in 2.0m pole into the logger the actuall measured height is around 1.945m from spike to top of dome??
• I have a Trimble TS305 which I try to commnicate with through a Recon and Survey Pro but I do not have the communication settings. I tried port 1, baud 1200 and odd but get a comm error #581. Can you help me with th correct setings?
• Can a Trimble R8 GNSS rover be configured to work as a second rover for a Trimble R6 GPS system? Or could the Trimble R8 be used as the base and the two Trimble R6 units be used as two rover units? If so, what are the advantages/ disadvantages to this setup?
• Will a 5700 rover work with a Trimble micro centred antenna, the one used with the 4700.
• Can you get a GPS lock when it's really cloudy?
• Is it is possible to upgrade a Trimble R8 mk1 to recieve glonass?
• I'm working with a client on a very large highway project that is going to go Trimble Machine Control. My firm will be doing the layout the bridges and sewer/paving. Our problem lies in that Tribmle is not cross over friendly with site work and surveying. We run R8/M3 via 450/470MHz. I need to get the R8's over to 900MHz to work together with the machines and the site. I don't want to go SPS as its a step backwards and we already tooled with 6 such R8's. (not a small investment) So bottom line can to swap a SPS 900 radio with a R8/M3 as Trimble does not offer the 900 for there survey side. Yes I can set up my own base or go VRS but we need no added issues. Also I understand there are code issues over mixing SBS900 with Survey Controller. Thanks
• I have a 5603 DR 200. I also have a second 5603 DR200 that is not working, but has a tracker unit. Is the install of the tracker on my working unit straight forward? Does the instrument also need a firmware update? Where I live Trimble no longer support the 5600. My question the other day about the 5700 error log problem I solved by downgrading the firmware download and the download a freash copy of the latest firmware I am allowed. No error log and it is working fine. Thanks for your help.
• I noticed the 5600 2.4 GHz radio question of the 10 January. Must the 2.4 GHz radio be used with the Geo 600 in the 450 MHz band or does it need an upgrade as well? I was a bit confused by your answer. If that is so then what is the point of upgrading?
• I have a spectra physics laser and wondering if you repair them?
• I am looking for a system that will allow me to put down a receiver and from a distance, within 10-25 cm accuracy, tell me exactly where the receiver is. What do I need?
• I am looking for a key pad (V1) for a Sokkia set 4 110R. Would you have 1 or know where I might find one? This instrument is about 8 years old.
• I have a spectra LL 300 that won't level itself.
• Is there a pdf file with instructions on how to use and operate the Trimble handheld survey unit ?
• Hello I have an older David Wright 8300. It needs calibration and possibly lens work or replacement. Cannot see cross hairs anymore. Do you have a Miami location?
• I have a Trimble multi channel 360 prism for the ATS. Will it work with my 5600 DR200? Trimble 571181586 MULTI CHANEL TRACK TARGET ATS 360 ROBOTIC
• Geo explorer CE series has been idle for over 4 years. The battery is not taking a charge. Sometimes it will come on when first place on charger then it goes off. Can't turn on using switch on button. Do I need a new battery? Where I can I purchase one on line?
• My Nikon DTM-521 has been locking up the last week. Weather has not been below freezing and I have to disconnect battery to wake it up again and it just locks back up when I try and shoot a distance. I have deleted all the stored jobs and calibrated in the "menu" and I'm lost now. I looked in my owners manual but there is no "troubleshooting" in it. I also sent it off last year to have professionally calibrated. Any ideas.
• Trimble S-6 and TSC2 have been working great, out of the blue I keep getting radio link down at 100'+/-. All batteries charged and channel and ID match. Any Thoughts?
• My Geodimeter 600CU stopped working. When it's on the total station, it just blinks the back light. When connected to the PC, it puts a message on the display which says: LOAD PROGRAM. What is the problem and how can I fix it?
• How do I find out what version of software/hardware version is on my Trimble R8 GPS receivers?
• My builder's level won't stay level when turned off it's original position. I tried tuning it level by adjusting the screws at 90 degrees but it keeps going out as I turn it. Is there a trick to fixing this? Thanks
• Do you sell the new trimble base radio that conforms to the FCC Bandwidth rule?
• I am currently using the Survey Pro version 4.4 program and I need to know if I can setup at any location within the jobsite to get the points to figure out a layout?
• Do you have a 2' TNC to TNC cable?
• What kind of battery is the internal battery of 5600 Trimble instrument?
• Do you have an office location in the New Orleans, LA area?
• Good Afternoon, I am looking for a MSDS sheet for internal and external batteries used with the Trimble 5600 Total Station. Is this something you can provide me with? my email address is steven.malin@starnetgeomatics.com Thank you for your help.
• How do you connect TS305 to recon
• I need a laser measuring device that will measure straightness and elevations of either Train rails or Crane rails.
• Do you sell Trimble Geomatic Office and Trimble Access software?
• My Trimble TS305 does not like to work in warm weather. It displays an error message 042. Can this be repaired and how much will it cost?
• We are interested in precise GPS measurement of a vehicle moving from a few MPH to up to 70 MPH. I know Martin primarily provides surveying instruments but are there any data collection systems that would help solve this? we are interested in short-term (rental) solutions. Thanks!
• How does the base, rover and controller work together to ensure GPS point positioning?
• I run the Focus Spectra Precision 10. I have a 3 battery pack that powers it but the batteries don't last for a 12 hour day so I bought the gator clip cord to run from a 12V battery. My question is how do I connect the gator clip cord to run the instrument as you need the 3 battery pack to connect the collector to the instrument so you can start it? I have tried using the gator clip cord and just connecting it to the 3 battery pack on the other side(as there are 4 ways to connect to on the 3 battery pack) and it just doesn't connect the power. Hopefully you know what I am talking about with this question.
• I am an engineer and want to do a topo survey of my mom,s property. I have a survey. need contours. What do you suggest?
• Do you offer beginner classes for Trimble GPS?
• Does the Trimble R3 really obtain sub centimeter accuracy? If so, will it perform under tree canopy?
• I have a trimble trimpac p/n 16768-20 gps do you have a vehicle mount p/n 132140-00 and external antenna p/n 12038-00 and a vehicle power adaptor p/n 22433-20
• Do you offer replacement parts for Sokkia Total Stations? Specifically, I am looking for a lens cap for a Set530R3.
• Test
• Do you lease the Spectra Precision Epoch 50? If so, what would the cost break down be?
• Can you connect between a Topcon GPT and Trimble Survey Controller software or Trimble Survey Access, using Bluetooth.
• What is the difference between gps receiver and gps rover
• With trimble R8, how many seconds or minutes it take to coordinate a station?
• What is the accuracy of the Trimble R3? There are references in the literature to post-processing. Where does the data come from for post-processing (i.e. do I need another receiver)? Can I use the R3 to record and label 200+ points in the field? When I return to the office, can I download those points into the Trimble office software and use that software to measure distances between the points? How long to I need to remain at each point to get <1m accuracy? 30 seconds? 5 minutes?
• I need to survey levels on an offshore oil platform. The work will include positioning the boundaries of an equipment protection structure and checks on levels of steel pipes and hull structures in the area. Can you reccommend appropriate equipment?
• Can I run a SPS930 (like S8?) on Trimble Access or Survey Controller? If not, can the firmware be updated to make it think it is an S6 or S8 so it will?
• I have been trying to find the part number for a 5800 receiver so it can be used as a rover. I want the part number to ensure the correct part is ordered. Can you please advise? Thanks is advance.
• Do you have a monthly rental rate on your R8 units?
• What are the possible reasons for receiving such radio errors?*RAdio link down) I use it in collaboration with NetR8 receiver. The performance had been okay until two weeks ago. Each time I use it in open areas, it keeps on saying "Radio Link down". It's making my work to take longer than necessary. I don't know why and there is no infor on the same subject. Please help
• If I lease the Trimble R6 pkg, does it come with a base and rover?
• WILL SPECTRA PRECISION SURVEY PRO SUPPORT/WORK WITH TRIMBLE 5800 GPS WITH 900MHZ INTERNAL RADIOS?
• Can I use an antenna that is for frequencies 450-470 with my Trimmark III that has frequencies 430-450? If not, do you sell the antennas for frequencies 430-450?
• is the R8 GNSS compatible with the Carlson Survey software?
• Need a Trimble S6 backup battery change after some period ,(like the model 5600) every 2years or not? thanks for answer milan
• is this brand new..give me the complete list of trimble R8 equipment and accessories available
• If I have an R8 rover that has the frequency range 430-450, can I get it switched to 450-470? If so, is that a service that you can provide?
• I have multiple real estate parcels. please recommend equipment to purchase model and type to produce my own surveys.
• can I pay with Paypal
• What are the specs difference between the Trimble SPS 700 and SPS 710
• What's the difference between the S6 and SPS710?
• I'm looking to rent an S6 setup for a period of 2-4 weeks (maybe longer). Our office is in Pennsylvania. Is it possible to have the instrument and accessories shipped to our location for use? Thank you.
• where can I get a replacement disc or a download geomatic office from the internet
• I have an account and would like to use it instead of a credit card for an online purchase for the promotional code Martin10
• I see that the trimble s8 has a prism mode and a relfectorless mode called (DR). what does DR stand for?
• I purchased 4 R8's from a municipality. I am interested in having them checked out. I just need to know they're functional and what "SPECS" these units have. Any idea of the cost just to look at a unit and verify it's OK?
• Wanting to know what all comes with the Trimble R6 GPS system (i.e. TSC2 data collector, range pole, etc.) - thank you.
• in the sale of a new R3 system 2 pack, what did you included in this price?
• the receiver 5700 have off batten and blue,what is the work of the blue one
• I have 10 years experience repairing survey equipment. Is there any positions avaiable in the tampa area?
• I found out that this unit is discontinued but can't find a user guide/owners manual...any idea where i can find one/link? was this unit discontinued for any specific reason/defect?
• Can you guys repair Trimble 4000SSE's and Trimble 4400 receivers?